Capable of high, medium, and low voltage output, reducing initial investment and operating costs

Thermal decomposition gas generator units can customize 10500V and 6 thermal decomposition gas generator units with V, 400V high, medium, and low voltage outputs to meet various user needs, avoiding the initial investment in purchasing transformers, reducing copper losses, and reducing operating costs; It can be connected to the grid and used directly with load, greatly improving the economic benefits of the unit.

 

Large cylinder diameter and long stroke ensure continuous and stable output power of the unit

 

The prime mover of the pyrolysis gas generator set series is a modified version of the pyrolysis gas generator set type diesel engine with a cylinder diameter of mm for the pyrolysis gas generator set. It has the characteristics of large cylinder diameter, long stroke, low rotational speed, and large power reserve. It is more suitable for the characteristics of low gas pressure than high-speed units. It is a better prime mover, and the unit output power is continuously stable.

Low rotational speed ensures unit service life

The rotating speed of the unit is mainly 500r/min and 600r/min. Low rotating speed reduces the wear of friction pairs of engine components, extends the service life of the components, reduces the storage of spare parts, and improves the economic benefits of users.

 

Non pressurized unit naturally aspirated, widely applicable to gas, with low failure rate

The large single cylinder emissions of the engine of a pyrolytic gas generator set can allow low-pressure gas and air to be naturally sucked in by the prime mover (the pressure of the gas source only needs to be greater than 2 kPa), making the range of use of the gas generator set wider and the low-pressure transmission of the gas source safer. Self priming intake, where the gas directly enters the combustion chamber after mixing, eliminates the need for intake links such as turbochargers and intercoolers, and has fewer components, naturally reducing the failure rate.

 

Inline upright structure simplifies engine layout, simple structure, and convenient maintenance

 

The pyrolysis gas generator set series gas engines are in-line engines with large maintenance and operation space; In particular, the crankshaft upright structure, whether it is unit overhaul or shafting maintenance, can be solved as long as it is on-site, greatly saving maintenance time and cost. However, the inverted structure of the crankshaft of domestic V-type high-speed engines cannot be overhauled on site without the assistance of professional overturning tooling, and must be returned to the manufacturer for maintenance.

 

Multiple defense lines ensure safe and efficient use of gas

Advanced air-fuel ratio control technology ensures that the engine is intake at an ideal mixture ratio; The engine intake pipe is equipped with an explosion-proof valve, which automatically relieves pressure once it backfires; The flame arrester installed on the pipeline has a quenching effect on the flame and can prevent the spread of the flame; The solenoid valve will quickly cut off the gas source to ensure the safety of the unit.

 

Waste heat recovery and utilization, achieving comprehensive utilization of gas-fired cogeneration

 

The exhaust gas of the unit is directly used as a waste heat boiler to generate hot water or steam, and the unit is cooled to generate hot water, which can provide heating, bathing, and other heat. Through comprehensive utilization, the comprehensive thermal efficiency of the gas can reach over 70%, improving economic benefits.

 

Thank you for reading. The source of this article is: Pyrolysis Gas Generator Set. For more information and questions, please click: http://www.peldhb.com We will continue to work hard to provide you with services, thank you for your support!