1. 風力不穩定:主要表現為風力不足、風向變化、風速波動大等，這種情況下需要及時檢查風機的運行參數。

1. Unstable wind power: mainly manifested as insufficient wind power, changes in wind direction, large fluctuations in wind speed, etc. In this case, it is necessary to check the operating parameters of the wind turbine in a timely manner.

　　2. 溫度過低:通常是指主機過熱或冷卻系統散熱不良，這個問題可以通過更換風扇和散熱器來解決。

2. Low temperature: usually refers to overheating of the host or poor cooling of the cooling system. This problem can be solved by replacing the fan and radiator.

　　3. 風葉斷裂:如果風葉不能正常工作，則會影響到整個機組的性能。

3. Blade breakage: If the blade cannot function properly, it will affect the performance of the entire unit.

　　4. 葉片變形:如果葉片變形嚴重或者出現裂紋，一般表示電機質量差,建議更換新的。

4. Blade deformation: If the blade deformation is severe or cracks appear, it generally indicates poor motor quality, and it is recommended to replace it with a new one.

以上就是有關：工業尾氣發電機組 的介紹，想了解更多的內容請點擊：http://www.peldhb.com 我們將會全心全意為您提供滿分服務，歡迎您的來電！

The above is an introduction to industrial exhaust gas generator sets. For more information, please click: http://www.peldhb.com We will wholeheartedly provide you with full score service. Welcome to call us!